(b) Disconnect the I1 connector from the outer rear view mirror assembly RH.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH (SCB+, SGND) See: C1683
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
3. REPLACE SIDE TELEVISION CAMERA ASSEMBLY
(a) Replace the side television camera assembly with a new or normally functioning one See: Accessories and Optional
Equipment/Camera/Forward Looking Camera/Service and Repair/Removal.
NEXT -- Continue to next step.
4. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Parking Assist Monitor System).
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Parking Assist Monitor System).
Result:
B -- END
A -- REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH See: Body and Frame/Mirrors/Service and Repair/Removal
and Replacement/Outer Rear View Mirror/Removal
No comments:
Post a Comment