2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2412

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPLACE STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU)

OK -- Continue to next step.

5. CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - STEERING LOCK ECU)

(a) Disconnect the F8 connector from the power management control ECU.

(b) Disconnect the F37 connector from the steering lock actuator assembly (steering lock ECU).

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER MANAGEMENT CONTROL ECU - STEERING

LOCK ECU)

OK -- Continue to next step.

6. READ VALUE USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Power Source Control / Data List.

(e) Read the Data List according to the display on the Techstream.