Saturday, May 2, 2020

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2363


1. CHECK FOR DTC



(a) Clear the DTCs See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Testing and Inspection/Reading and Clearing



Diagnostic Trouble Codes/Power Back Door System.



(b) Recheck for DTCs.



OK:



DTC B2225 is not output.



NG -- REPLACE POWER BACK DOOR ECU (POWER BACK DOOR MOTOR UNIT) See: Body and Frame/Doors, Hood



and Trunk/Trunk / Liftgate/Trunk / Liftgate Motor/Service and Repair/Removal



OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



From 08/2009



DOOR / HATCH: POWER BACK DOOR SYSTEM: B2225: Back Door Motor Clutch Malfunction



B2225 - Back Door Motor Clutch Malfunction



DESCRIPTION



When an electrical malfunction (open or short) is detected in the clutch circuit of the power back door ECU (power back door motor unit) while the



power back door is operating, the power back door ECU (power back door motor unit) stores DTC B2225.



INSPECTION PROCEDURE



PROCEDURE



1. CHECK FOR DTC



(a) Clear the DTCs See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Testing and Inspection/Reading and Clearing



Diagnostic Trouble Codes/Power Back Door System.



(b) Recheck for DTCs.



OK:



DTC B2225 is not output.



NG -- REPLACE POWER BACK DOOR ECU (POWER BACK DOOR MOTOR UNIT) See: Body and Frame/Doors, Hood



and Trunk/Trunk / Liftgate/Trunk / Liftgate Motor/Service and Repair/Removal



OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



Up to 08/2009



DOOR / HATCH: BACK DOOR CLOSER SYSTEM: B2250: Back Door Closer Operation Malfunction



B2250 - Back Door Closer Operation Malfunction



DESCRIPTION



The power back door ECU (power back door motor unit) receives signals from the latch switch, sector switch, back door courtesy switch and pawl



switch, which are built into the back door lock. Based on these switch signals, the latch position of the back door lock is determined.

No comments:

Post a Comment