Text in Illustration
(c) Connect the positive (+) battery terminal to terminal 1 and connect the negative (-) battery terminal to terminal 2. Check the valve
operation.
OK:
Valve moves quickly.
(d) Reinstall the camshaft timing oil control valve assembly for intake camshaft.
NG -- REPLACE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (FOR INTAKE CAMSHAFT) See: Engine,
Cooling and Exhaust/Engine/Actuators and Solenoids - Engine/Variable Valve Timing Actuator/Service and Repair/Removal
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY - ECM)
(a) Disconnect the camshaft timing oil control valve assembly connector.
Text in Illustration
(b) Disconnect the ECM connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
No comments:
Post a Comment