HINT
If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle
may decrease.
NG -- REPLACE ATF TEMPERATURE SENSOR ASSEMBLY See: Powertrain Management/Transmission Control
Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Transmission Temperature
Sensor/Switch/Service and Repair/U660F Automatic Transaxle/Removal
OK -- REPLACE TRANSMISSION WIRE See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair/U660F Automatic Transaxle/Removal
Up to 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P0715,P0717: Input / Turbine Speed
Sensor Circuit Malfunction
DESCRIPTION
This sensor detects the rotation speed of the turbine which shows the input revolution (speed) of the transaxle. By comparing the input turbine speed
signal (NT) with the counter gear speed sensor signal (NC), the TCM detects the shift timing of the gears and appropriately controls the engine
torque and hydraulic pressure according to various conditions, thus, providing smooth gear shifts.
Text in Illustration
MONITOR DESCRIPTION
The NT terminal of the TCM detects a revolution signal from the speed sensor (NT) (input RPM). The TCM calculates gear shifts comparing the
speed sensor (NT) with the speed sensor (NC).
No comments:
Post a Comment