(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / D-Door Motor / Data List.
(e) Read the Data List according to the display on the Techstream.
D-Door Motor (Power Window Regulator Motor Assembly (for Driver Side))
OK:
On the Techstream screen, ON or OFF is displayed accordingly.
NG -- CHECK HARNESS AND CONNECTOR (MASTER SWITCH - DRIVER SIDE MOTOR)
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
4. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - DRIVER SIDE MOTOR)
(a) Disconnect the multiplex network master switch assembly connector.
(b) Disconnect the power window regulator motor assembly (for driver side) connector.
(c) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment