Standard Voltage:
Text in Illustration
HINT
*: The voltage will drop slightly due to lighting up of the back up light.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/U660E Automatic Transaxle/Removal
5. CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - TCM)
(a) Turn the engine switch off.
(b) Disconnect the TCM connector.
(c) Disconnect the park/neutral position switch connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
No comments:
Post a Comment