NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (IGB CIRCUIT)
OK -- Continue to next step.
3. CHECK MILLIMETER WAVE RADAR SENSOR (SGND CIRCUIT)
(a) Disconnect the millimeter wave radar sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(c) Reconnect the millimeter wave radar sensor connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (SGND CIRCUIT)
OK -- Continue to next step.
4. CHECK MILLIMETER WAVE RADAR SENSOR (LRDD OUTPUT VOLTAGE)
(a) Disconnect the driving support ECU connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(d) Reconnect the driving support ECU connector.
NG -- REPLACE MILLIMETER WAVE RADAR SENSOR See: Accessories and Optional Equipment/Collision Avoidance and
Parking Assist Systems/Distance Sensor/Service and Repair/Removal
No comments:
Post a Comment