2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) U CODE Page 337

OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR POWER SOURCE CIRCUIT)

(a) Disconnect the millimeter wave radar sensor connector.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

(d) Reconnect the millimeter wave radar sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR - BODY GROUND)

(a) Disconnect the millimeter wave radar sensor connector.

Text in Illustration

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(c) Reconnect the millimeter wave radar sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

4. CHECK MILLIMETER WAVE RADAR SENSOR