4. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
From 08/2009
NETWORKING: CAN COMMUNICATION SYSTEM: U110B,U1110: Lost Communication with Parking Assist Control Module "B"
U1110 - Lost Communication with Clearance Sonar Module
DESCRIPTION
HINT
The parking assist ECU includes the clearance sonar module (w/ parking assist monitor and intuitive parking assist system).
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
* Turn the engine switch off before measuring the resistances between CAN bus main wires and between CAN bus branch
wires.
* Turn the engine switch off before inspecting CAN bus wires for a ground short.
* After the engine switch is turned off, check that the key reminder warning system and light reminder warning system are not
No comments:
Post a Comment