Standard Voltage:
NG -- REPLACE DRIVING SUPPORT ECU See: Cruise Control/Cruise Control Module/Service and Repair/Components
OK -- Continue to next step.
6. REPLACE MILLIMETER WAVE RADAR SENSOR
(a) Replace the millimeter wave radar sensor See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Distance Sensor/Service and Repair/Components.
(b) Adjust the millimeter wave radar sensor See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Distance Sensor/Adjustments.
NEXT -- Continue to next step.
7. CHECK DTC OUTPUT
(a) Clear the DTCs See: Cruise Control/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Dynamic Radar Cruise
Control System.
(b) Perform the following to make sure that the DTC detection conditions are met.
HINT
If the detection conditions are not met, the malfunction cannot be detected.
(1) Drive the vehicle at a speed of 50 km/h (31 mph) or more.
(2) Turn the cruise control main switch on.
(3) Push the -SET switch to activate the cruise control.
(c) Check for DTCs See: Cruise Control/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Dynamic Radar Cruise
Control System.
Result:
B -- REPLACE DRIVING SUPPORT ECU See: Cruise Control/Cruise Control Module/Service and Repair/Components
A -- END
Up to 08/2009
PRE-COLLISION: PRE-COLLISION SYSTEM: U0235: Lost Communication with Cruise Control Front Distance Range Sensor
U0235 - Lost Communication with Cruise Control Front Distance Range Sensor
No comments:
Post a Comment