(e) Check the DTC See: Steering and Suspension/Suspension/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
Result:
C -- GO TO DTC CHART
B -- END (C1761 WAS OUTPUT DUE TO UNUSUAL VEHICLE OR USAGE CONDITION)
A -- Continue to next step.
3. INSPECT AIR TUBE FOR AIR LEAK OR CLOG
(a) Inspect the air tube for air leaks or clogs See: Steering and Suspension/Suspension/Service Precautions/Suspension Control System.
OK:
No air leaks or clogs are found in the air tube.
NG -- REPAIR OR REPLACE AIR TUBE
OK -- Continue to next step.
4. INSPECT HEIGHT CONTROL VALVE NO. 1
(a) Turn the engine switch off.
(b) Disconnect the height control valve No. 1 connector.
(c) Measure the resistance according to the values in the table below.
Standard resistance:
Text in Illustration
(d) Check the front RH valve.
(1) Connect a positive (+) lead from the battery to terminal 3 (RH+) and a negative (-) lead to terminal 2 (E).
(2) Check the operating sound of the height control valve No. 1.
OK:
It makes an operating sound (click).
(e) Check the front LH valve.
No comments:
Post a Comment