HINT
* *: It may take about 2 or 3 minutes until the values are displayed.
* When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
Result:
B -- END
A -- REPLACE TIRE PRESSURE WARNING ECU
Up to 08/2009
HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1442/42: Air Inlet Damper Control Servo Motor Circuit
B1442/42 - Air Inlet Damper Control Servo Motor Circuit
DESCRIPTION
The air inlet control servo motor sends pulse signals to indicate the damper position to the A/C amplifier. The A/C amplifier activates the motor
(normal or reverse) based on these signals to move the air inlet mode selection air inlet control damper to any position, which controls the intake air
settings (FRESH, FRESH/RECIRCULATION, and RECIRCULATION).
The A/C amplifier communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness.
HINT
Confirm that no mechanical problem is present because this DTC can be output when either a damper link or the damper is
No comments:
Post a Comment