(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reconnect the driving support ECU and millimeter wave radar sensor connectors.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR - BODY GROUND)
(a) Disconnect the millimeter wave radar sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reconnect the millimeter wave radar sensor connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (DRIVING SUPPORT ECU POWER SOURCE CIRCUIT)
(a) Disconnect the driving support ECU connector.
No comments:
Post a Comment