CONFIRMATION DRIVING PATTERN
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
- Turn the engine switch off.
- Turn the engine switch on (IG) and turn the Techstream on [A].
- Start the engine.
- After starting the engine, wait 5 seconds [B].
- Enter the following menus: Powertrain / Engine / Utility / All Readiness.
- Input the DTC: P0230.
- Check the DTC judgment result [C].
No comments:
Post a Comment