2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 605

NEXT -- Continue to next step.

6. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT

(a) Initialize the rotation angle sensor value and calibrate the torque sensor zero point See: Steering and Suspension/Steering/Testing

and Inspection/Programming and Relearning.

NEXT -- Continue to next step.

7. CHECK FOR DTC

(a) Check for DTCs See: Steering and Suspension/Steering/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.

Result:

NOTICE:

If DTC C1516 or C1526 is output even though the rotation angle sensor value initialization and torque sensor zero point

calibration have been performed, confirm the procedure again, and perform the calibration and initialization 3 times.

HINT

Replace the steering column assembly if DTC C1516 or C1526 is still output after performing rotation angle sensor value

initialization and torque sensor zero point calibration 3 times.

B -- END

A -- REPLACE STEERING COLUMN ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and

Repair/Removal and Replacement/Removal

Up to 08/2009

POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: C1528: Motor Rotation Angle Sensor Malfunction

C1528 - Motor Rotation Angle Sensor Malfunction

DESCRIPTION

The motor rotation angle sensor detects the motor rotation angle and sends this information to the power steering ECU.