2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) U CODE Page 215

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)

OK -- Continue to next step.

4. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)

OK -- REPLACE OUTER MIRROR CONTROL ECU LH See: Body and Frame/Mirrors/Power Mirror Control Module/Service

and Repair/Removal

From 08/2009

NETWORKING: CAN COMMUNICATION SYSTEM: U0200: Lost Communication with "Door Control Module B"

U0200 - Lost Communication with "Door Control Module B"

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

* Turn the engine switch off before measuring the resistances between CAN bus main wires and between CAN bus branch

wires.

* Turn the engine switch off before inspecting CAN bus wires for a ground short.

* After the engine switch is turned off, check that the key reminder warning system and light reminder warning system are not

operating.

* Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the engine switch, any other