Tuesday, January 1, 2019

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) U CODE Page 160


(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes/Rear View Monitor System (w/ Side Monitor System).



Result:



HINT



* If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when



rechecking for DTCs.



* If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection



again, even though the DTC was not output when rechecking for DTCs See: Accessories and Optional Equipment/Antitheft



and Alarm Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With



Troubleshooting.



B -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



A -- GO TO CAN COMMUNICATION SYSTEM See: Powertrain Management/Computers and Control Systems/Information



Bus/Testing and Inspection/Initial Inspection and Diagnostic Overview/CAN Communication System/How to Proceed With



Troubleshooting



Up to 08/2009



LIGHTING (EXT): LIGHTING SYSTEM: U0101,U0073,U0100,U0126,U0129,U0130,U0142,U0163,U0182,U1000,U1121: Lost



Communication with ECM



U1121 - Lost Communication with Driver Seat Module



DESCRIPTION



The DTCs are stored when the CAN communication system is malfunctioning.



INSPECTION PROCEDURE



PROCEDURE



1. CHECK FOR DTC



(a) Clear the DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.



(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.



OK:



DTCs are not output.



NG -- GO TO CAN COMMUNICATION SYSTEM See: Powertrain Management/Computers and Control Systems/Information



Bus/Testing and Inspection/Initial Inspection and Diagnostic Overview/CAN Communication System/How to Proceed With



Troubleshooting



OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm

No comments:

Post a Comment