(c) Reconnect the front seat outer belt assembly RH connector.
NG -- REPLACE FRONT SEAT OUTER BELT ASSEMBLY RH See: Restraints and Safety Systems/Seat Belt Systems/Seat
Belt/Service and Repair/Removal and Replacement/Front Seat Outer Belt Assembly/Removal
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT BELT CONTROL ECU)
(a) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(b) Disconnect the front seat outer belt assembly RH connector.
(c) Disconnect the seat belt control ECU connector.
(d) Using a service wire, connect MOR+ and MOR- of the connector on the front seat outer belt assembly RH.
NOTICE:
Do not forcibly insert the service wire into the terminals of the connector.
(e) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Text in Illustration
(f) Reconnect the seat belt control ECU and front seat outer belt assembly RH connectors.
(g) Connect the cable to the negative (-) battery terminal.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT
BELT CONTROL ECU)
OK -- REPLACE SEAT BELT CONTROL ECU
No comments:
Post a Comment