2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 222

(b) Disconnect the G5 display and navigation module display connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

3. REPLACE PARKING ASSIST ECU

(a) Replace the parking assist ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking

Assist Control Module/Service and Repair/Parking Assist ECU/Removal.

(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/Navigation System (for HDD).

(c) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation

System/Service and Repair/Navigation Receiver (for HDD)/Removal

OK -- END

From 08/2009

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B15D8: Monitor Disconnected

B15D8 - Monitor Disconnected

DESCRIPTION

The display and navigation module display and parking assist ECU are connected by the AVC-LAN communication line.

When an AVC-LAN communication error occurs between the display and navigation module display and parking assist ECU, this DTC will be