(d) Turn the Techstream on.
(e) Check the vehicle speed signal on the Techstream. Enter the following menus: Body Electrical / Tilt & Telescopic / Data List.
Tilt & Telescopic
Result:
HINT
Vehicle speed of 3 km/h (2 mph) or more may be displayed on the Techstream immediately after the vehicle comes to a sudden
stop. This is caused by a delay in vehicle signal input via the CAN communication bus and is not a malfunction.
B -- GO TO METER / GAUGE SYSTEM See: Instrument Panel, Gauges and Warning Indicators/Testing and Inspection/Initial
Inspection and Diagnostic Overview/How To Proceed With Troubleshooting/From 08/2009
A -- REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
Up to 08/2009
SEAT: FRONT POWER SEAT CONTROL SYSTEM (w/ Memory): B2650: Slide Sensor Malfunction
B2650 - Slide Sensor Malfunction
DESCRIPTION
When the position control ECU and switch assembly (seat ECU) does not receive a sensor signal despite forward or backward movement of seat by
power seat motor operation, this DTC is output.
No comments:
Post a Comment