Standard Voltage:
Text in Illustration
NG -- REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
OK -- Continue to next step.
5. CHECK TILT AND TELESCOPIC SWITCH
(a) Remove the tilt and telescopic switch See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and
Switches - Steering/Tilt Wheel Switch/Service and Repair/Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE TILT AND TELESCOPIC SWITCH See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Tilt Wheel Switch/Service and Repair/Removal
OK -- REPLACE HEADLIGHT DIMMER SWITCH ASSEMBLY
Up to 08/2009
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: B2610: Tilt Position Sensor or
Tilt Motor Circuit Malfunction
B2610 - Tilt Position Sensor or Tilt Motor Circuit Malfunction
DESCRIPTION
The tilt motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and makes the steering column tilt up and
down. The tilt position sensor (Hall IC) in the tilt motor detects the tilt angle of the steering column and outputs a signal to the multiplex tilt and
telescopic ECU based on that angle.
No comments:
Post a Comment