(f) Clear the DTCs stored in the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(g) Turn the engine switch off.
(h) Turn the engine switch on (IG), and wait for at least 60 seconds.
(i) Check for DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear.
Result:
Text in Illustration
HINT
Codes other than DTC B1630/23 and B1635/24 may be output at this time, but they are not related to this check.
C -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY See: Relays and Modules/Relays and Modules - Restraints and Safety
Systems/Air Bag Control Module/Service and Repair/Removal
B -- REPLACE REAR AIRBAG SENSOR LH
A -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
From 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1635/24: Rear Airbag Sensor LH Circuit Malfunction
B1635/24 - Rear Airbag Sensor LH Circuit Malfunction
DESCRIPTION
The side collision sensor LH circuit (to determine deployment of the front seat side airbag assembly LH, rear seat side airbag assembly LH and
curtain shield airbag assembly LH) is composed of the center airbag sensor assembly, side airbag sensor LH (for rear side), rear airbag sensor LH
and side airbag sensor LH (for front side).
The rear airbag sensor LH detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be
deployed.
DTC B1635/24 is recorded when a malfunction is detected in the rear airbag sensor LH.
No comments:
Post a Comment