(d) Check for a short in the circuit.
(1) Release the activation prevention mechanism built into connector D See: Restraints and Safety Systems/Air Bag Systems/Testing
and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE SPIRAL CABLE See: Restraints and Safety Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Removal
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
From 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1800/51-B1803/51: Short in Driver Side Squib Circuit
B1803/51 - Short to B+ in Driver Side Squib Circuit
DESCRIPTION
* The driver side squib circuit consists of the center airbag sensor assembly, spiral cable and steering pad.
* The circuit instructs SRS to deploy when deployment conditions are met.
* These DTCs are recorded when a malfunction is detected in the driver side squib circuit.
No comments:
Post a Comment