INSPECTION PROCEDURE
PROCEDURE
1. READ VALUE USING TECHSTREAM (TILT UP/DOWN SWITCH, TELESCOPIC SHORT/LONG SWITCH)
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Turn the Techstream on.
(e) Check the tilt and telescopic manual switch. Enter the following menus: Body Electrical / Tilt & Telescopic / Data List.
Tilt & Telescopic
OK:
"ON" is displayed on the Techstream screen when each switch is turned on.
"OFF" is displayed on the Techstream screen when each switch is turned off.
NG -- CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TILT AND TELESCOPIC
SWITCH)
OK -- Continue to next step.
2. CONFIRM DTC
(a) Clear the DTC See: Steering and Suspension/Steering/Steering Column/Testing and Inspection/Reading and Clearing Diagnostic
No comments:
Post a Comment