(b) Press preset switch "2" to change the mode to "Detailed Information Mode".
(c) Identify the component which has stored this code.
Component Table
HINT
* "P440" set by the stereo component amplifier assembly is shown in the preceding illustration as an example.
* For details of the DTC display, refer to DTC Check/Clear See: Accessories and Optional Equipment/Radio, Stereo, and
Compact Disc/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Audio and Visual System (w/o
Navigation System).
NEXT -- Continue to next step.
4. CHECK COMPONENT SHOWN BY SUB-CODE
(a) Select the component shown by the sub-code.
HINT
The satellite radio tuner is built into the radio receiver assembly. If there is a problem between the satellite radio tuner and radio
receiver assembly, replace the radio receiver assembly.
Component Table
B -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
A -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR
HINT
For details of the connectors, refer to Terminals of ECU See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Pinout Values and Diagnostic Parameters/Audio and Visual System (w/o Navigation System).
No comments:
Post a Comment