Result:
B -- REGISTRATION OF TRANSMITTER ID
A -- Continue to next step.
3. REPLACE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Replace the tire pressure warning valve and transmitter See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring
System/Tire Pressure Sensor/Service and Repair/Removal and Replacement/Removal.
NEXT -- Continue to next step.
4. REGISTRATION OF TRANSMITTER ID
(a) Perform registration See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning/Registration.
NEXT -- Continue to next step.
5. PERFORM INITIALIZATION
(a) Perform initialization See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning/Registration.
NEXT -- Continue to next step.
6. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor/ Data List.
(e) Check the values by referring to the table below.
No comments:
Post a Comment