Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO B+)
OK -- Continue to next step.
48. CHECK WIRE HARNESS (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO GROUND)
OK -- Continue to next step.
49. CHECK SIDE AIRBAG SENSOR RH (FOR FRONT SIDE)
(a) Connect the connectors to the rear airbag sensor RH.
(b) Interchange the side airbag sensor LH (for front side) with side airbag sensor RH (for front side) and connect the connectors.
No comments:
Post a Comment