(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Allow exhaust gas (NOx) to travel to the sensing portion of the smog ventilation sensor.
(e) Enter the following menus: Body Electrical / Air Conditioner / Data List.
(f) Check the value(s) by referring to the table below.
Air Conditioner
OK:
The display is as specified in the Normal Condition column.
Result:
C -- REPLACE A/C AMPLIFIER
B -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Heating and Air
Conditioning/Testing and Inspection/Symptom Related Diagnostic Procedures
A -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (SMOG VENTILATION SENSOR - BODY GROUND)
(a) Disconnect the smog ventilation sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (SMOG VENTILATION SENSOR - BATTERY)
No comments:
Post a Comment