(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (AVC-LAN COMMUNICATION LINE)
(a) Disconnect the multi-display assembly connector.
(b) Disconnect the display and navigation module display connector.
(c) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment