NG -- REPLACE FUEL SENDER GAUGE ASSEMBLY (for 2GR-FE) See: Instrument Panel, Gauges and Warning
Indicators/Fuel Gauge Sender/Service and Repair/Removal
OK -- Continue to next step.
5. CHECK FUEL SUCTION PUMP AND GAUGE ASSEMBLY
(a) Visually check for deformation on the fuel suction pump and gauge assembly connector.
OK:
There is no deformation.
NG -- REPLACE FUEL SUCTION PUMP AND GAUGE ASSEMBLY (for 2GR-FE) See: Instrument Panel, Gauges and
Warning Indicators/Fuel Gauge Sender/Service and Repair/Removal
OK -- REPLACE COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument
Cluster / Carrier/Service and Repair/Removal and Replacement/Combination Meter/Removal
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for DVD): B1563,B1596: Remote Touch Disconnected
B1563 - Remote Touch Disconnected
B1596 - No Response from Remote Touch
DESCRIPTION
The display and navigation module display and remote touch (remote operation board) are connected by the MOST communication line.
When a MOST communication error occurs between the display and navigation module display and remote touch (remote operation board) , these
DTCs will be stored.
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* The display and navigation module display is the master unit.
No comments:
Post a Comment