2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 261

(b) Make sure that there is no looseness at the locking part and the connecting part of the connector.

(c) Disconnect the skid control ECU connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

for RH

for LH

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

11. INSPECT SKID CONTROL ECU (SENSOR INPUT)

(a) Reconnect the skid control ECU connector.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.