1. INSPECT HEIGHT CONTROL OFF SWITCH
(a) Disconnect the height control OFF switch connector.
(b) Measure the resistance according to the values in the table below.
Standard resistance:
Text in Illustration
NG -- REPLACE HEIGHT CONTROL OFF SWITCH
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (HEIGHT CONTROL OFF SWITCH - ECU AND BODY GROUND)
(a) Disconnect the A56 ECU connector.
(b) Disconnect the F18 height control OFF switch connector.
(c) Measure the resistance according to the values in the table below.
Standard resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE SUSPENSION CONTROL ECU
No comments:
Post a Comment