2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 178

(a) Turn the engine switch off.

(b) Check the speed sensor installation (for 2WD).

OK:

There is no clearance between the sensor and the rear axle carrier.

(c) Check the speed sensor installation (for AWD).

OK:

There is no clearance between the sensor and the rear axle carrier.

The installation bolt is tightened properly.

Torque

8.0 N*m (82 kgf*cm, 71 in.*lbf)

Result:

D -- INSTALL REAR SPEED SENSOR CORRECTLY (for AWD)

C -- INSTALL REAR SPEED SENSOR CORRECTLY (for 2WD) See: Brakes and Traction Control/Antilock Brakes / Traction

Control Systems/Wheel Speed Sensor/Service and Repair/Rear Speed Sensor/Installation

B -- CHECK HARNESS AND CONNECTOR (SKID CONTROL SENSOR WIRE)

A -- Continue to next step.

7. CHECK REAR SPEED SENSOR TIP

(a) Remove the rear speed sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed

Sensor/Service and Repair/Rear Speed Sensor/Removal.

(b) Check the speed sensor tip.

OK:

No scratches, oil, or foreign matter on the sensor tip.

NOTICE:

Check the speed sensor signal after cleaning or replacement See: Brakes and Traction Control/Antilock Brakes / Traction

Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.