(c) Start the engine.
(d) Select the Data List on the Techstream See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Scan Tool Testing and Procedures/Data List / Active Test.
ABS/VSC/TRAC
(e) Check that the speed value output from the speed sensor displayed on the Techstream.
HINT
Factors that affect the indicated vehicle speed include tire size, tire inflation, and tire wear. The speed indicated on the
speedometer has an allowable margin of error. This can be tested using a speedometer tester (calibrated chassis dynamometer).
For details about testing and the margin of error, see the reference chart See: Instrument Panel, Gauges and Warning
Indicators/Testing and Inspection/Component Tests and General Diagnostics/On-Vehicle Inspection.
OK:
The speed value output from the speed sensor displayed on the Techstream is the similar speed as indicated on the
speedometer.
NG -- CHECK REAR SPEED SENSOR INSTALLATION
OK -- Continue to next step.
3. RECONFIRM DTC
(a) Turn the engine switch off.
(b) Clear the DTCs See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
(c) Start the engine.
(d) Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.
(e) Check if the same DTC is recorded See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes.
Result:
HINT
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next
step See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Symptom Related
Diagnostic Procedures/Problem Symptoms Table.
B -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Removal
A -- CHECK FOR INTERMITTENT PROBLEMS See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
4. CHECK REAR SPEED SENSOR INSTALLATION
(a) Turn the engine switch off.
No comments:
Post a Comment