When this DTC is set, the BUB (Back-Up Battery) must be replaced.
BUB (Back-Up Battery) degradation DTC B15EC is not reported in deactive mode.
INSPECTION PROCEDURE
NOTICE:
* If this DTC is set, be certain to replace the BUB (Back-Up Battery) with a new one.
* After the BUB (Back-Up Battery) is replaced, it is necessary to clear this DTC.
* The BUB (Back-Up Battery) must not be replaced while an ACN call is in progress.
PROCEDURE
1. CHECK DTC
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG) and wait for 10 seconds.
(d) Turn the Techstream on.
(e) Perform "HEALTH CHECK" and check for current DTCs See: Accessories and Optional Equipment/Emergency Contact
Module/Testing and Inspection/Initial Inspection and Diagnostic Overview/Safety Connect System/Health Check.
Result:
B -- CHECK FOR INTERMITTENT PROBLEMS See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
A -- REPLACE BUB (BACK-UP BATTERY) See: Accessories and Optional Equipment/Emergency Battery/Service and
Repair/Removal
Up to 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): B15E1: Media Malfunction
B15E1 - Media Malfunction
DESCRIPTION
This DTC is stored when signals from disc in the radio receiver assembly cannot be read.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DISC
(a) Check that the disc is not deformed or cracked.
No comments:
Post a Comment