(b) Disconnect the P34 receiver connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK TIRE PRESSURE WARNING ECU
(a) Reconnect the F53 ECU connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:
Text in Illustration
NG -- REPLACE TIRE PRESSURE WARNING ECU
OK -- REPLACE TIRE PRESSURE WARNING ANTENNA AND RECEIVER See: Instrument Panel, Gauges and Warning
Indicators/Tire Monitoring System/Tire Pressure Monitor Receiver / Transponder/Service and Repair/Removal
From 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error
C2176/76 - Receiver Error
No comments:
Post a Comment