Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. REPLACE RADIO RECEIVER ASSEMBLY
(a) Replace the radio receiver assembly See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for HDD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE MULTI-DISPLAY ASSEMBLY
OK -- END
1. REPLACE MULTI-DISPLAY ASSEMBLY
(a) Replace the multi-display assembly See: Accessories and Optional Equipment/Navigation System/Navigation Display/Service and
Repair/Removal and Replacement/Multi-Display/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for HDD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
OK -- END
B15EC
CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B15EC: Backup Battery Degradation
B15EC - Backup Battery Degradation
DESCRIPTION
This DTC is set when the DCM (Telematics Transceiver) detects either of the following conditions.
* The BUB (Back-Up Battery) charge level becomes less than the criteria.
* Automatic Collision Notification (ACN) occurred.
No comments:
Post a Comment