A -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - FRONT LEFT SENSOR)
(a) Disconnect the F52 connector from the clearance warning ECU.
(b) Disconnect the A12 connector from the No. 1 ultrasonic sensor.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (FRONT LEFT SENSOR - FRONT RIGHT SENSOR)
(a) Disconnect the A12 and A13 connectors from the No. 1 ultrasonic sensors.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment