NEXT -- Continue to next step.
8. CHECK DTC OUTPUT (C1AEC)
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Intuitive Parking Assist System.
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Intuitive Parking Assist System.
Result:
B -- END (FRONT RIGHT SENSOR WAS DEFECTIVE)
A -- REPLACE CLEARANCE WARNING ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking
Assist Systems/Parking Assist Control Module/Service and Repair/Clearance Warning ECU/Removal
9. CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - FRONT LEFT SENSOR)
(a) Disconnect the F55 connector from the parking assist ECU.
(b) Disconnect the A12 connector from the No. 1 ultrasonic sensor.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (FRONT LEFT SENSOR - FRONT RIGHT SENSOR)
(a) Disconnect the A12 and A13 connectors from the No. 1 ultrasonic sensors.
No comments:
Post a Comment