(b) Disconnect the F35 tilt motor connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK TILT MOTOR
(a) Apply 12 V battery voltage to the tilt motor connector.
(b) Then check the steering wheel tilt operation.
OK:
Text in Illustration
NG -- REPLACE STEERING COLUMN ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Removal
OK -- REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
6. CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TILT
No comments:
Post a Comment