(a) Reconnect the J7 connector.
(b) Disconnect the K2 connector.
(c) Clear the DTC See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
(d) After 10 seconds have elapsed, check if the trouble occurs again.
(e) Check for DTCs again.
Result:
B -- REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
A -- Continue to next step.
7. CHECK DTC OUTPUT (FRONT POWER WINDOW REGULATOR MOTOR LH)
(a) Reconnect the K2 connector.
(b) Disconnect the J1 connector.
(c) Clear the DTC See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
(d) After 10 seconds have elapsed, check if the trouble occurs again.
(e) Check for DTCs again.
Result:
B -- REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
A -- Continue to next step.
8. CHECK DTC OUTPUT (FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH)
(a) Reconnect the J1 connector.
(b) Disconnect the I2 connector.
(c) Clear the DTC See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
(d) After 10 seconds have elapsed, check if the trouble occurs again.
(e) Check for DTCs again.
Result:
B -- REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH See: Body and Frame/Doors, Hood
and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
No comments:
Post a Comment