NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK PARKING ASSIST ECU (CV-, CGND)
(a) Reconnect the F55 connector to the parking assist ECU.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
3. CHECK REAR TELEVISION CAMERA ASSEMBLY (CB+, CGND)
(a) Disconnect the Y14 connector from the rear television camera assembly.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
4. CHECK PARKING ASSIST ECU (CV+, GND1)
(a) Reconnect the Y14 connector to the rear television camera assembly.
(b) Reconnect the F54 and F55 connectors to the parking assist ECU.
No comments:
Post a Comment