B -- END
A -- Continue to next step.
10. REPLACE TIRE PRESSURE WARNING ANTENNA AND RECEIVER
(a) Replace the tire pressure warning antenna and receiver See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring
System/Tire Pressure Monitor Receiver / Transponder/Service and Repair/Removal.
NEXT -- Continue to next step.
11. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
HINT
- *: It may take about 2 or 3 minutes until the values are displayed.
- When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
No comments:
Post a Comment