INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Rear View Monitor System (w/ Side Monitor System).
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Rear View Monitor System (w/ Side Monitor System).
Result:
HINT
- This DTC may be stored due to the battery condition or changes in the power supply waveform when starting the engine, even
though there is no problem with the AVC-LAN communication system.
- If DTC C168B or C168C is output frequently, duplicate the problem symptoms and perform the inspection again, even though
the DTC is not output when rechecking for DTCs See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting.
B -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
A -- GO TO NAVIGATION SYSTEM (for HDD) See: Accessories and Optional Equipment/Navigation System/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Navigation System (for HDD)/How to Proceed With Troubleshooting
Up to 08/2009
PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: C168D: Vehicle Information Unmatched
C168D - Vehicle Information Unmatched
DESCRIPTION
This DTC is stored if the parking assist ECU judges as a result of its self check that the vehicle information received from the ECM via CAN
communication and the vehicle information stored in the parking assist ECU do not match.
INSPECTION PROCEDURE
NOTICE:
- When "System initializing" is displayed on the multi-display after the battery terminal disconnected, correct the steering angle
neutral point See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Programming and Relearning/Parking Assist Monitor System/Initialization.
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance,
No comments:
Post a Comment