NG -- CHECK HARNESS AND CONNECTOR
OK -- REPLACE REMOTE OPERATION BOARD See: Accessories and Optional Equipment/Navigation System/Navigation
Display/Service and Repair/Removal and Replacement/Multi Info Display/Removal
1. CHECK HARNESS AND CONNECTOR
(a) Disconnect the G14 remote touch connector.
(b) Disconnect the G6 display and navigation module display connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
1. CHECK MOST COMMUNICATION CONNECTORS
(a) Check the MOST communication line connectors.
(1) Check if the MOST communication line connector between the remote touch and radio receiver assembly have any connection
problems See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Diagrams/Diagnostic Aids/How To
Troubleshoot ECU Controlled Systems/Electronic Circuit Inspection Procedure.
(b) Display the "MOST Line Check" screen and check the result See: Accessories and Optional Equipment/Navigation System/Testing
and Inspection/Reading and Clearing Diagnostic Trouble Codes/Navigation System (for HDD).
No comments:
Post a Comment