(d) Measure the resistance between the remote touch and radio receiver assembly according to the value(s) in the table below.
Standard Resistance:
(e) Measure the resistance between the radio receiver assembly and stereo component amplifier assembly according to the value(s) in the
table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE RADIO RECEIVER ASSEMBLY
(a) Replace the radio receiver assembly See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- END
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B1591,B15D1: No Response from Audio HU
B1591 - No Response from Audio HU
B15D1 - Audio HU Disconnectedn
No comments:
Post a Comment