OK:
DTC B1925, B1926, B1927, B1928, or 78 is not output.
Text in Illustration
HINT
Codes other than DTC B1925, B1926, B1927, B1928, and 78 may be output at this time, but they are not related to this check.
NG -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY See: Relays and Modules/Relays and Modules - Restraints and
Safety Systems/Air Bag Control Module/Service and Repair/Removal
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
Up to 08/2009
PRE-COLLISION: PRE-COLLISION SYSTEM: B2000: Short to B+ in Seat Belt Motor RH Circuit
B2000 - Short to B+ in Seat Belt Motor RH Circuit
DESCRIPTION
The seat belt control ECU receives information from the driving support ECU through CAN communication and tightens the seat belt by operating
the motor in the front seat outer belt assembly RH.
WIRING DIAGRAM
INSPECTION PROCEDURE
CAUTION:
The pretensioner is built into the front seat outer belt assembly RH. Be sure to follow the correct inspection procedure, as failure
to follow the correct procedure (such as inspection of incorrect connectors) may deploy the pretensioner.
PROCEDURE
1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH
(a) Disconnect the front seat outer belt assembly RH connector.
No comments:
Post a Comment