(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
for RH
for LH
NOTICE:
Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.
Text in Illustration
NG -- REPLACE SKID CONTROL SENSOR WIRE
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - REAR SPEED SENSOR)
(a) Reconnect the skid control sensor wire (for 2WD).
No comments:
Post a Comment