Standard Resistance:
Text in Illustration
NG -- CHECK FLOOR WIRE (SHORT)
OK -- Continue to next step.
5. CHECK OCCUPANT CLASSIFICATION SYSTEM CIRCUIT (SHORT TO GROUND)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FLOOR WIRE (SHORT TO GROUND)
OK -- Continue to next step.
6. RECHECK DTC
(a) Connect the connectors to the occupant classification ECU and center airbag sensor assembly.
(b) Connect the Techstream to the DLC3.
(c) Connect the cable to the negative (-) battery terminal.
(d) Turn the engine switch on (IG).
(e) Clear the DTCs stored in the occupant classification ECU See: Restraints and Safety Systems/Testing and Inspection/Reading and
No comments:
Post a Comment